Vibration Testing: Theory and Practice, Second Edition is a step-by-step guide that shows how to obtain meaningful experimental results via the proper use of modern instrumentation, vibration exciters, and signal-processing equipment, with particular emphasis on how different types of signals are processed with a frequency analyzer. Thoroughly updated, this new edition covers all basic concepts and principles underlying dynamic testing, explains how current instruments and methods operate within the dynamic environment, and describes theirbehavior in a number of commonly encountered field and laboratory test situations. INDICE: Chapter One: an Overview Of Vibration Testing. 1.1 Introduction. 1.2 Preliminary Considerations. 1.3 General Input/Output Relationships in the Frequency Domain. 1.4 Overview of Equipment Employed. 1.5 Summary. Chapter Two:Dynamic Signal Analysis. 2.1 Introduction. 2.1.1 Signal Classification. 2.1.2Temporal Mean Value. 2.1.3 Temporal Mean Square and Temporal Root Mean Square. 2.1.4 The Frequency Spectrum. 2.1.5 Analysis of a Single Sinusoid. 2.2 Phasor Representation of Periodic Functions. 2.2.1 The Phasor. 2.2.2 The Phasor andReal-Valued Sinusoids. 2.3 Periodic Time Histories. 2.3.1 Periodic Fourier Series. 2.3.2 The Mean, Mean Square, and Parsevals Formula. 2.3.3 Analysis of a Square Wave. 2.4 Transient Signal Analysis. 2.4.1 Difference Between Periodic and Transient Frequency Analysis. 2.4.2 The Transient Fourier Transform. 2.4.3Transient Mean, Mean Square, And Parseval's Formula. 2.5 Correlation Concepts- A Statistical Point of View. 2.6 Correlation Concepts - Periodic Time-Histories. 2.6.1 Cross-Correlation. 2.6.2 Auto-Correlation. 2.7 Correlation Concepts - Transient Time-Histories. 2.7.1 Cross-Correlation. 2.7.2 Auto-Correlation.2.8 Correlation Concepts - Random Time Histories. 2.8.1 Auto-Correlation and Auto-Spectral Density. 2.8.3 Correlation and Spectral Densities of Multiple Random Processes. 2.8.4 Statistical Distributions. 2.9 Summary. 2.10 General References on Signal Analysis. References. Chapter Three: Vibration Concepts. 3.1Introduction. 3.2 The Single DOF Model. 3.2.1 Equation of Motion. 3.2.2 Free Undamped Vibration. 3.2.3 Free Damped Vibration. 3.2.4 Structure Orientation and Natural Frequency. 3.3 Single Degree of Freedom Forced Response. 3.3.1 The Viscous Damping Case. 3.3.2 Common Frfs. 3.3.3 Damping Models in Forced Response. 3.3.4 The Structural Damping Response. 3.3.5 The Bode Diagram. 3.3.6 Real ) Being Nonunity. 4.10 Calibration. 4.10.1 Accelerometer Calibration - Sinusoidal Excitation. 4.10.2 Accelerometer Calibration - Transient Excitation. 4.10.3 Force Transducer - Sinusoidal Excitation. 4.10.4 Force Transducer - Transient Excitation. 4.10.5 Effects of Bending Moments on Measured Forces. 4.11 Environmental Factors. 4.11.1 Base Strain. 4.11.2 Cable Noise. 4.11.3 Humidity and Dirt. 4.11.4 Mounting the Transducer. 4.11.5 Nuclear Radiation. 4.11.6 Temperature. 4.11.7 Transducer Mass. 4.11.8 Transverse Sensitivity. 4.12 Summary. References. Chapter Five: The Digital Frequency Analyzer. 5.1 Introduction. 5.2 Basic Processes of A Digital Frequency Analyzer. 5.2.1 The Time Sampling Process. 5.2.2 Time-Domain Multiplication and Frequency-Domain Convolution. 5.2.3 Sample Function Multiplication Gives Aliasing. 5.2.4 The Window Function Createsthe Digital Filter Characteristics. 5.2.5 Filter Leakage. 5.3 Digital Analyzer Operating Principles. 5.3.1 Operating Block Diagram. 5.3.2 Internal Calculation Relationships. 5.3.3 Display Scaling. 5.4 Factors In The Application of a Single Channel Analyzer. 5.4.1 Filter Performance Characteristics. 5.4.2 Four Commonly Employed Window Functions. 5.4.3 Window Comparison for Use with Sinusoidal Signals. 5.4.4 Spectral Line Uncertainty. 5.4.5 Recommended Window Usage. 5.5 The Dual Channel Analyzer. 5.5.1 Ideal Input - Output Relationships. 5.5.2 Actual Input-Output Estimates for A Digital Analyzer. 5.5.3 Auto-Spectra and Cross-Spectra Averaging. 5.5.4 Some Reasons Coherence Is Less than Unity. 5.5.5 Operating Block Diagram. 5.6 The Effects of Signal Noise on Frf Measurements. 5.6.1 Noise in The Input Signal. 5.6.2 Noise in The Output Signal. 5.6.3 Noise in The Input And Output Signals. 5.6.4 More than One External Input. 5.7 Overlapping Signal Analysis to Reduce Analysis Time. 5.7.1 Overlapping And Ripple. 5.7.2 Effective Bandwidth Time Product And Measurement Uncertainty. 5.7.3Real Time Analysis. 5.8 Zoom Analysis. 5.8.1 Zoom FFT Analysis Using The Heterodyning Method. 5.8.2 Long Time Record Zoom FFT Analysis. 5.8.3 Zoom AnalysisWith And Without Sample Tracking. 5.9 Scan Analysis, Scan Averaging, And MoreOn Spectral Smearing. 5.9.1 Scan Analysis. 5.9.2 Scan Averaging and ResultingFrequency Spectra. 5.9.3 Scan Average Analysis of a Transient Signal. 5.9.4 More on Spectral Smearing. 5.10 Summary. 5.11 References. Chapter Six: Vibration Excitation Mechanisms. 6.1 Introduction. 6.1.1 Static Excitation Schemes. 6.1.2 Dynamic Impulse Loading Schemes. 6.1.3 Controlled Dynamic Loading Schemes.6.2 Mechanical Vibration Exciters. 6.2.1 The Direct-Drive Exciter Model. 6.2.2 The Direct-Drive Vibration Exciter Table. 6.2.3 The Direct-Drive Reaction Type Vibration Exciter. 6.2.4 The Rotating Unbalance Exciter. 6.2.5 Driving Torque Considerations. 6.3 Electrohydraulic Exciters. 6.3.1 Electrohydraulic System Components. 6.3.2 Application to Earthquake Simulator. 6.4 The Modeling Of An Electro-Magnetic Vibration Exciter System. 6.4.1 Exciter Support Dynamics. 6.4.2 Armature Dynamics. 6.4.3 Electro-Mechanical Coupling Relationships. 6.4.4Power Amplifier Characteristics. 6.5 An Exciter System's Bare Table Characteristics. 6.5.1 The Electro-Dynamic Model. 6.5.2 Constant Current Mode Power Amplifier. 6.5.3 Voltage Mode Power Amplifier. 6.5.4 Comparison Of Bare Table Armature Responses. 6.6 Interaction Of An Exciter And A Grounded Single Dof Structure. 6.6.1 The Single DOF SUT and Electrodynamic Exciter Model. 6.6.2 The SUT's Accelerance Response. 6.6.3 The Force Transmitted To The Sut And Force DropOut. 6.7 Interaction Of An Exciter And An Ungrounded Structure Under Test. 6.7.1 A General Dynamic Model Using Driving Point and Transfer Accelerance. 6.7.2 Ungrounded Test Structure and Exciter Accelerance Characteristics,. 6.7.3 Test Responses for Current and Voltage Mode Power Amplifier Inputs,. 6.8 Measuring an Exciters Actual Characteristics. 6.8.1 Theoretical Model. 6.8.2 ArmatureImpact Test Results with "stiff" and "Soft" Supporting System. 6.8.3 ArmatureDriven by a Second Exciter. 6.8.4 Armatures Rotational Degrees of Freedom. 6.8.5 Exciter Structure Interaction During Test. References. Chapter Seven: The Application Of Basic Concepts To Vibration Testing. 7.1 Introduction. 7.2 Sudden Release Or Step Relaxation Method. 7.2.1 Theoretical Modal Model. 7.2.2 Mid-Point Excitation and Response. 7.2.3 Resolving the Measurement Dilemma. 7.2.4Results from an Actual Test. 7.3 Forced Response Of A Simply Supported Beam Mounted On An Exciter. 7.3.1 Modal Model of The Test Environment. 7.3.2 The Effect of Accelerometer Mass on Measurements. 7.3.3 The Limits for Modal Mass Correction to Natural Frequencies. 7.3.4 Added Mass at the Quarter Point. 7.4 Impulse Testing. 7.4.1 Impulse Requirements. 7.4.2 The Input Noise Problem. 7.4.3The Output Leakage Problem. 7.4.4 Application of Impulse Testing to a Free-Free Beam. 7.5 Selecting Proper Windows for Impulse Testing. 7.5.1 Window Parameters. 7.5.2 Modeling the Data Process. 7.5.3 Truncation and Exponential WindowEffects. 7.5.4 The Effects of the Input Transient Window. 7.5.5 A Second Example of An Impact Driving Point Accelerance Test Results. 7.5.6 Recommended Procedure for Setting Window Parameters. 7.6 Vibration Exciter Driving A Free-Free Beam With Point Loads. 7.6.1 Selecting the Excitation Signal. 7.6.2 Test Setup. 7.6.3 Theoretical Exciter Structure Interaction. 7.6.4 Comparison of Experimental and Theoretical Results. 7.7 Windowing Effects On Random Test Results.7.7.1 A Model of Window Function Filter Leakage Characteristics. 7.7.2 Estimating FRF Errors Due to Leakage. 7.7.3 Theoretical Simulation of Leakage and its Effects. 7.7.4 Recommendations to Check For This Filter Error. 7.8 Low Frequency Damping Measurements Reveal Subtle Data Processing Problems. 7.8.1 The Test Set Up. 7.8.2 The Hardware Error. 7.8.3 A Software Problem. 7.8.4 Another Common Measurement Error Source. 7.9 A Linear Structure Becomes Non-Linear Due To Its Test Environment.. 7.10 Summary. References. Chapter Eight: General Vibration Testing Model: From The Field To The Laboratory. 8.1 Introduction. 8.1.1 General Linear System Relationships . 8.1.2 Three Structures Involved in theProcess. 8.2 A Two Point Input-Output Model Of Field And Laboratory Simulation Environments. 8.2.1 Notation Scheme. 8.2.2 The Field Environment. 8.2.3 Laboratory Environment. 8.2.4 Discussion of Elementary Results. 8.3 Laboratory Simulation Schemes Based On The Elementary Model. 8.3.1 Test Scenario #1 - Matched Interface Motions and NO External Forces. 8.3.2 Test Scenario #2 - Matched Interface Forces and No External Forces. 8.3.3 Test Scenario #3 - Matched Test Item Motion and No External Forces. 8.3.4 Scenario #4 - Matched Interface Motion with Field Extermal Force but No Laboratory External Force. 8.3.5 Scenario #5 - Matched Interface Forces with Field External Force but No Laboratory External Force. 8.3.6 Test Scenario #6 - Matched Test Item Motion with Field External Force but No Laboratory External Force. 8.3.7 Summary of Six Possible TestScenarios. 8.4 An Example Using A Two Dof Test Item And A Two DOF Vehicle. 8.4.1 Test Item And Vehicle Dynamic Characteristics. 8.4.2 Laboratory Test SetupEmployed During Tests. 8.4.3 Field Simulation Results. 8.4.4 Laboratory Simulation. 8.4.5 Predicting Interface Forces and Accelerations From Bare Vehicle Interface Acceleration ASD Data. 8.4.6 Summary And Conclusions For This Simple Example. 8.5 The General Field Environment Model. 8.5.1 Frequency Domain Modeling. 8.5.2 Field Motions and Boundary Conditions. 8.6 The General Laboratory Environment Model. 8.7 Test Scenarios for Laboratory Simulations. 8.8 Summary.
- ISBN: 978-0-471-66651-6
- Editorial: John Wiley & Sons
- Encuadernacion: Cartoné
- Páginas: 672
- Fecha Publicación: 22/10/2008
- Nº Volúmenes: 1
- Idioma: Inglés